2 articles about connectors — buying guides, process explainers and technical comparisons.
Connectors
The stamped parts inside EV charging connectors: power terminals, HVIL and signal contacts, shields and retention hardware. Materials, contact design, tolerances, high-volume progressive stamping, selective plating 2-8 µm gold, and a DFM checklist.
2026-08-28 · 16 min read
ReadConnectors
Connector stamping splits into signal and power by design: spring alloys (phosphor bronze, beryllium copper) and plating (selective gold, tin, silver) decide force, resistance and life. Reel-to-reel at 300 SPM, ±0.005 mm.
2026-08-16 · 19 min read
ReadProgressive die stamping, in-house tooling and assembly — from prototype to mass production. Send your drawing and volume, get a quote within 24 hours.